Keep Your Gear
Dive-Ready.

Professional inspection, maintenance, and repair for scuba equipment - so you can dive with confidence.

REGULATORS

First and second stages, octopus systems, performance testing, troubleshooting, and repair.

BCD SERVICE

Inflators, valves, leak detection, and component servicing.

CYLINDERS + AIR

Visual inspection, air fills, EAN32, hydrostatic testing available.

COMPUTERS + GAUGES

Inspections, battery replacement, and system diagnostics.

GEAR QUESTIONS? ASK HERE!

How Service Works

1 BRING IT IN

Drop off your gear at our shop with details about the issue.

2 INSPECTION

Our technicians inspect and provide a service quote.

3 WE CONTACT YOU

If the quote changes or additional work is needed.

4 WE SERVICE IT

We service and prepare your gear for pickup.

TURNAROUND VARIES

Turnaround time depends on equipment, required work, parts availability, and current service volume.

Pre-Trip Gear Check

Heading out of town? Let us help make sure your gear is ready to go. Schedule a pre-trip gear check and dive with confidence.

ASK ABOUT A PRE-TRIP GEAR CHECK

FAQs

What brands does SSE service?

We service most major brands of scuba equipment. If we can't, we will refer you to a shop who can.

What is the safety policy?

Safety always comes first - equipment that is unsafe may not be serviceable.

How often should I service my regulator?

Many regulators call for annual inspections and full service approximately every other year or every 100 dives. Manufacturer requirements vary - check your specific manufacturer guidance.

Does SSE Fill Nitrox?

Yes! We offer air and Nitrox (EAN32) fills.

Do you work on dive computers?

Yes. We inspect and perform battery replacement on most popular dive computers and gauges.

Keep IT Dive READY

Regulator Care

We have certified technicians in-shop who will complete your annual maintenance, inspection, and required regulator repairs.

Rinse your regulator thoroughly with fresh water after diving, with the first-stage dust cap securely in place. Allow it to dry completely out of direct sunlight before storing, and regularly check hoses, mouthpieces, connections, and second stages for visible wear or damage.

Follow your regulator manufacturer's guidelines/requirements, however, most require the following:

Inspection annually, or if you notice leaks or a change in performance.
Serviced every other year or 100 dives, whichever comes first.

If you notice leaking, unusual breathing resistance, or a change in performance, have your regulator inspected before your next dive.

We service most regulator brands.

BCD Care

We sell many styles of high quality Bouyancy Control Devices including jacket, plate/wing, and back-inflate styles. We service most brands and styles of BCD as well.

After each dive, you should rinse and flush the inside and outside of the BCD with fresh water. Consider using BCD Cleaner to kill all the micro-organisms in the lake/sea water you were diving.

Check the low pressure inflate junction to ensure the threads are intact, and the rubber gasket is undamaged. You should also check to ensure the weight pocket quick release snaps and all releases on the BCD are undamaged. Finally, check all dump valves to ensure they are working and not clogged with debris.

Most manufacturers recommend BCDs be inspected annually or after any lengthy period of storage or non-use. Always check the manufacturer instructions provided for your specific gear.

Our professional team can inspect and repair this important piece of dive gear to keep you safe, and maximize your diving enjoyment. Regular inspections can also increase the longevity of your investment.

Cylinder Care

We sell, rent, inspect and maintain aluminum and steel scuba cylinders. We do not fill or inspect paint-ball cylinders.

On-staff we have five PSI/PCI Certified Cylinder Inspectors, and our Operations Manager is a Certified Fill Station Operator.

Cylinders should be professionally visually inspected every year, and hydro-statically inspected every five years in North America. You should also have your cylinders inspected if your tank is visibly damaged (warped, dinged, etc) after a fall, exposure to unusual heat, or other such event.

Before each use, you should look at your cylinder to ensure the valve-wheel turns easily (consider purchasing a safety valve handle that indicates red/green when the valve is open closed) isn't leaking, the O-ring is intact, also inspect for visible damage to the cylinder itself.

We fill EAN 32% and Air. Not EAN (Nitrox) certified yet? We can complete your Nitrox Certification and there are NO dives required!

Avoid completely emptying a cylinder; maintaining some positive pressure helps reduce the chance of moisture entering the tank.

SHOP WITH EXPERTS

We carry trusted brands and quality gear we use and recommend.

APEKS ● AQUALUNG ● SHEARWATER
TUSA ● XS SCUBA ● TOVATEC ● & MORE

Need gear for
your next dive?

Rent quality equipment or talk to our team about service.

Explore Rentals

Service Inquiry

Keep Your Gear Dive-Ready.